PIPEWELD 7010 PLUS | ESAB

Typical Charpy V-Notch Properties

Impact Value Testing Temperature
As Welded Aws
55 J (41 ft-lb) -20 degC (-4 degF)
45 J (33 ft-lb) -30 degC (-22 degF)

Typical Tensile Properties

Condition Elongation Shielding Gas Tensile Strength Yield Strength
As Welded 22 % AWS 570 MPa (83 ksi) 480 MPa (70 ksi)

Deposition Data

Current Deposition Rate @ 90% I max Diameter Deposition Efficiency (%) Number of electrodes/kg weld metal Voltage
65-120 A 90 sec 3.2 x 350.0 mm (1/8 x 13,8 in.) 0.62 kg/h (1,4 lb/h) 58 % 65 31 V
90-180 A 93 sec 4.0 x 350.0 mm (5/32 x 13,8 in.) 0.93 kg/h (2,1 lb/h) 59 % 42 30.5 V
150-240 A 100 sec 5.0 x 350.0 mm (0.197 x 13,8 in.) 1.47 kg/h (3,2 lb/h) 67 % 24 28.6 V

Classifications

Classifications SFA/AWS A5.5 : E7010-P1
EN ISO 2560-A : E 42 2 Z C 21

Approvals

Grade E 7010-P1
Society FBTS
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Low alloyed (0.3 % Ni, 0.2 % Mo)
Coating Type Cellulosic covering
Welding Current DC+

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Mn Mo Ni Si
0.09 % 0.46 % 0.24 % 0.34 % 0.12 %

kirim penawaran untuk kawat las esab type PIPEWELD 7010 PLUS

WeCreativez WhatsApp Support
Butuh iformasi cepat, langsung chat disini
👋 Hi, ada yang bisa kami bantu?