Cigweld

There’s no Job too big or too small for us to take on.

COMET EDGE ESS3 Argon Regulator 45Lpm

Spesifications

Blowpipe
COMET 3

Extension Barrel
307123, 307124, 307125

Gas Consumption (Fuel)
41-55 l/min

Gas Consumption (Oxy)
45-58 l/min

Heat Output
180 MJ/HR

Mixer
304003

Model Number
SHA1

Operating Pressure (Fuel)
100 kPa

Operating Pressure (Oxy)
150 kPa

Tip Size
8×12

COMET EDGE ESS4 Nitrogen Regulator 1000kPa

Spesifications

Maximum Inlet Pressure
20,000kPa @ 15°C

Maximum Outlet Pressure
1,000kPa

Air Flow @ Outlet
1,200 l/min @ 700kPa

Inlet Test Pressure
1,700kPa (to achieve air flow @ outlet stated)

COMET EDGE ESS4 Hydrogen Regulator 800kPa

Spesifications

Blowpipe
COMET 3

Extension Barrel
307123, 307124, 307125

Gas Consumption (Fuel)
41-55 l/min

Gas Consumption (Oxy)
45-58 l/min

Heat Output
180 MJ/HR

Mixer
304003

Model Number
SHA1

Operating Pressure (Fuel)
100 kPa

Operating Pressure (Oxy)
150 kPa

Tip Size
8×12

COMET 3 BLOWPIPE – TORCH HANDLE

The COMET 3 blowpipe, when used with appropriate attachments, is suitable for fusion welding, braze welding, brazing, soldering, heating, hand cutting, sheet metal cutting, rivet cutting, powder facing and flame cleaning.

Features:
Two stage valve gives precise gas control from the smallest welding tip to the largest heating tip
Permits fine sensitive control for delicate welding jobs and easy lighting up, to flows of up to 600 l/min for the heaviest heating job
A non-rotating valve spindle drastically minimises wear
Due to O-ring seals, only hand tightening is required to connect the mixer or cutting attachment to the handle
Locking teeth secure re-positioning with hand tightening
Handle shape gives comfortable positive grip
Left hand/right hand threads prevent incorrect hose connection
Colour coded control knobs are fitted for maximum safety and ease of operation, even when wearing gloves

Fuel type:
All

COMET 3 CUTTING ATTACHMENT

The COMET 3 Cutting Attachment is used in conjunction with the COMET 3 Blowpipe and is suitable for hand cutting, sheet metal cutting, rivet cutting, heating and gouging.

Features:

Attachs quickly and easily to COMET 3 Blowpipe by hand (no spanner required)
Locking teeth enable the attachment to be re-positioned
Tapered seat head allows multi-positioning of gouging nozzles
Cutting oxygen lever securely fitted to the body for ease of operation
Twin tube construction gives good visibility
Unique mutli-mixer design accommodates Oxy/Acet, Oxy/LPG and Oxy/Natural gas
Large flutes on hand tightening nut for a better grip when wearing gloves
For use with type 40 nozzles

Fuel type:
All

Cutting Capacity:
Up to 150mm

Cutting Nozzles:
Type 41 & 44


COMET 3 MIXER – HEATING – TYPE 570

COMET 3 Type 570 mixer is used for heating with all Oxy/Fuel gas type combinations

Features:

Hand tightening for easy attachment onto COMET 3 Blowpipe. (‘0’ ring seals ensure a perfect gas-tight connection every time)
Large flutes on mixer give easy positive handling, even when wearing welding gloves
Mixer 570 can be used with either Oxy/Acetylene, Oxy/LP gas or Oxy/Natural gas
No change required when altering fuel gas, other than the type of tip, hose and regulator required
Offers high resistance to backfire, regardless of the gas type or flow setting

Fuel type:
All

COMET 3 MIXER – WELDING/HEATING – TYPE 550

COMET 3 Type 550 mixer is used for welding and light heating with all Oxy/Fuel gas type combinations

Features:

Hand tightening for easy attachment onto COMET 3 Blowpipe. (‘0’ ring seals ensure a perfect gas-tight connection every time)
Large flutes on mixer give easy positive handling, even when wearing welding gloves
Mixer 550 can be used with either Oxy/Acetylene, Oxy/LP gas or Oxy/Natural gas
No change required when altering fuel gas, other than the type of tip, hose and regulator required
Offers high resistance to backfire, regardless of the gas type or flow setting

Fuel type:
All

Welding Capacity:

Up to 25mm

COMET 3 MIXER – HEATING – TYPE 574

COMET 3 Type 574 mixer is an injector mixer used for heating with Oxy/LPG, Oxy/Natural gas combinations, in heavy duty high flow applications. For use with SHP3 and SHP4 heating tips only.

Features:
Hand tightening for easy attachment onto COMET 3 Blowpipe. (‘0’ ring seals ensure a perfect gas-tight connection every time)
Large flutes on mixer give easy positive handling, even when wearing welding gloves
Mixer 574 is an injector mixer and can be used with either Oxy/LP gas or Oxy/Natural gas
Offers high resistance to backfire, regardless of the gas type or flow setting

Fuel type:
All

CutSkill Regulator Flowmeter 30 LPM (Side Inlet)

Produk Information 

The CutSkill Side Inlet Regulator Flowermeter provides accurate indication of flow rate of shielding gases for MIG and TIG welding processes. The Regulator/Flowmeters have been designed for TIG processes and for MIG, Short Arc and Spray Arc applications and are calibrated for O to 30 lpm.

The metering ball is stainless steel. They are constructed with a machined brass body and cap, are back pressure compensated and have a self-reseating relief valve – not designed to protect down stream equipment.

  • Maximum 30 LPM Flow Rate
  • Maximum Inlet Pressure 20,000kPa
  • Robust brass body and fittings
  • Failsafe against over pressure

COMET LPG CUTTING TIP – 2 SEAT

Nozzles are the vital component of flame cutting equipment. They provide the preheating flames to raise the steel to ignition temperatures and direct the jet of oxygen onto the heated area to perform the cutting process.
Oxygen and LPG cutting nozzles perform extremely well for certain applications. Due to less carbon in LPG, there is less slag adherence to the bottom of the cut.

Two seat designed nozzles for use with multi-purpose torches

Seat: 2
Gas: LPG

COMET FLASH BACK ARRESTOR (REG MOUNTED)

Designed for connection to the outlet of regulators and pipelines in medium flow applications.
Regulator mounted

Features:
Non-return valve.
Large cylindrical stainless steel flame arrestor.
Medium-flow capacity.
Supplied with inlet filter.
Temperature activated cut-off valve.

COMET FLASH BACK ARRESTOR (BLOWPIPE TORCH)

Designed for connection to the inlet of blowpipes in medium flow applications.

Features:
Non-return valve.
Large cylindrical stainless steel flame arrestor.
Medium-flow capacity

COMPACT High Flow Oxy Regulator, LP Supply

Spesifications 

COMET EDGE ESV4 Acetylene Regulator with GasGuard 150kPa

Spesifications 

CIGWELD 175i TIG TORCH

Air cooled

Heavy duty construction
400 amp air cooled at 60% duty cycle
Front and rear strain relief
Metal jacket conductor tube

Designed for use with the Cigweld Transtig 175i

Length: 4m

COMET ACETYLENE HEATING TIP

Connect SHA1 directly onto your choice of stainless steel superheating barrel

Gas: Oxy/Acetylene

Size: 8X12

COMET EDGE ESV4 Oxygen Regulator with GasGuard 1000kPa

Spesifications 

COMET 5000 HP Air Regulator 7000kPa

Spesifications 

COMET EDGE ESS3 LPG Regulator 400kPa

Spesifications 

COMET EDGE CO2 Preset Regulator 200kPa

Spesifications 

Kirim penawaran untuk cigweld

WeCreativez WhatsApp Support
Butuh iformasi cepat, langsung chat disini
👋 Hi, ada yang bisa kami bantu?